Clean Brine Eng - 3S Oil

CleanBrine Biocides and Antiseptics:

The use of biocides and antiseptics is widely used in such industries as water treatment, circulation of cooling systems in industrial enterprises, in the production of cosmetics / personal hygiene products, and paper production.

Separately, the use in the oil industry stands out.

The use of microbiocides is due to their high efficiency in inhibiting the growth of many bacteria, algae and sludge in the aquatic system, as well as antiseptics, in the production of personal hygiene products.

Product

Suppression

АPB

Suppression

Aerobes

Suppression

SBR

Suppression

speed

Suppression

time

CleanBrine BKC 80

High

Above-average

Above-average

High

Low

CleanBrine GA 50

Average

Above-average

High

Above-average

Above-average

CleanBrine THPS 75

Above-average

Above-average

Above-average

High

Above-average

CleanBrine DBNPA

Above-average

High

Above-average

High

Low

CleanBrine Bronopol

Average

Above-average

Average

Above-average

Above-average

CleanBrine Nitromethane

High

Above-average

Above-average

High

Above-average

 CleanBrine BKC 80

Description:

CleanBrine BKC 80 (Benzolconium Chloride 80%) is a cationic surfactant, a non-oxidizing bactericide.

It effectively controls the growth of algae and the increase in sludge in the water.

Due to its dispersive and penetrating properties, it can remove sludge and algae.

This material has low toxicity, soluble in water, convenient to use, does not depend on water hardness.

CleanBrine BKC 80 may also act as an antiseptic, antistatic additive.

Synonyms:

Dodecyl dimethyl benzyl ammonium chloride, DDBAC, BKC, Benzolkonium chloride

CAS: 8001-54-5, 63449-41-2, 139-07-1

Application:

When used as bactericidia and algaecide, the recommended dosage is 50-100 mg / l, and 200-300 mg / l as a sludge separator (add the appropriate silicone antifoam).

CleanBrine BKC 80 can be used in combination with other bactericides, such as isothiazolinones, glutaraldehydes, ditrionitrile methane, but it cannot be used with chlorophenols. If impurities appear after adding the product to the circulating cold water, they must be filtered off or drained in time after the disappearance of foaming, in order to prevent the formation of sediment at the bottom of the collector.

Do not mix with anionic surfactants.

Packing:

Plastic barrels with a volume of 25 kg or 200 kg, or according to customer requirements.СЗ

CleanBrine GA 50

Description:

Glutaraldehyde is a clear, colorless liquid with a sharp fruity medicinal odor and mixes with water, alcohol and benzene.

Effective against bacteria and fungi

Synonyms:

Glutaraldehyde, GA, Glutaraldehyde

CAS: 111-30-8

Application:

As an antiseptic in medicine

Widely used for oil production as a biocide:

– When flooding in supply water

– In drilling fluids,

– In kill fluids

– In repair fluids

– In hydraulic fracturing fluids

– In formation waters

– In oil and gas pipelines

– In production wells

Packing:

220 kg net / barrel, 1100 kg net / IBC

CleanBrine THPS 75

Descriptions

CleanBrine THPS 75% microbiocide for water treatment is a broad-spectrum biocide designed to inhibit the growth of algae, bacteria, yeast and fungi in process waters used in various industrial applications.

CleanBrine THPS 75% Microbiocide for water treatment is effective in both acidic and alkaline environments. It is especially effective against sulfate-reducing bacteria (SRB), which are especially dangerous during EOR oil production operations, such as purification of injection water, upper systems, protection and storage of pipelines.

CleanBrine THPS 75% microbiocide for water treatment is a 75% aqueous solution of tetrakis (hydroxymethyl) phosphonium sulfate

Synonyms:

Tetrakis (hydroxymethyl) phosphonium sulfate 75%, THPS

CAS: 55566-30-8

Application:

It inhibits the growth of microorganisms in systems during EOR operations and in industrial recirculation water cooling, production of water and non-food contact paper.

A broad-spectrum biocide against a number of bacteria, especially sulfate-reducing bacteria, (SRB) and algae (blue-green, green and other types such as yellow-green, brown and mustard seaweed).

Mixes in all proportions with each type of water, including sea water.

Easily deactivates under controlled conditions.

No organic solvents / water composition

Excellent chemical stability and good compatibility with most water treatment chemicals

Packing:

IBC 1400kg or 275kg drums

CleanBrine DBNPA

Description:

One of the main biocides in the CleanBrine series is CleanBrine DBNPA.

CleanBrine DBNPA is a broad-spectrum biocide. It is delivered in dry form, in an aqueous solution of 20% or upon request.

Synonyms:

2,2-Dibromo-3-nitrilopropionamide,, DBNPA, DBNPA, 2,2-dibromo-3-nitrilopropionamide.

CAS: 10222-01-2

Application:

It is used in water treatment as a highly effective inhibitor of the growth of bacteria and algae. CleanBrine DBNPA has found widespread use in oil production as one of the most effective bactericides in operations on EOR, hydraulic fracturing and others.

Packing:

Bags of 25 kg, or for convenience packaged in water-soluble bags of 5 kg, packed in plastic barrels up to 25 kg.

 CleanBrine Bronopol (CleanBrine Bronopol 30)

Description:

CleanBrine Bronopol (dry antiseptic) and CleanBrine Bronopol 30 (30% aqueous solution) are broad-spectrum antimicrobial supplements.

CleanBrine Bronopol and CleanBrine Bronopol 30 have the following advantages:

– Broad-spectrum bactericide

– Excellent efficacy against Pseudomonas sp.

– low toxicity

– It goes well with other antiseptics, especially based on isothiazolinone.

Synonyms:

Bronopol, Bronopol, 2-Bromo-2-nitro-1,3-propanediol

CAS: 52-51-7

Application in cosmetics and personal care products:

The antiseptics CleanBrine Bronopol and CleanBrine Bronopol 30 provide effective microbial control in concentrations from 0.01 to 0.1 wt.% And are the active ingredient in cosmetic formulations depending on the choice of other ingredients.

CleanBrine Bronopol and CleanBrine Bronopol 30 are especially useful as preservatives for creams and lotions, especially those containing aloe, lanolin, jojoba and other natural products.

CleanBrine Bronopol and CleanBrine Bronopol 30 are recommended for use in products with acidic, neutral or slightly alkaline pH. They are soluble in water, alcohols, glycols and other polyols. CleanBrine Bronopol and CleanBrine Bronopol 30, unlike many antiseptics, remain active in the presence of the most commonly used surfactants in cosmetics and toiletries.

Packaging:

CleanBrine Bronopol 25kg bags, big bags 600kg and 1000kg each, CleanBrine Bronopol 30 25kg bags, 200kg barrels.

CleanBrine Nitromethane

Description:

CleanBrine Nitromethane biocides are colorless to yellow aqueous solutions. CleanBrine Nitromethane solutions are available in 25% and 50% concentrations.

CleanBrine Nitromethane is also supplied as a dry powder with an active substance content of 97%.

The CleanBrine Nitromethane series biocides are odorless and work by releasing trace amounts of formaldehyde.

Synonyms:

Tris (hydroxymethyl) nitromethane, Tris (hydroxymethyl) nitromethane, THNM

CAS: 126-11-4

Application:

The main use of CleanBrine Nitromethane Biocides is the control of bacteria and sludge in industry.

CleanBrine Nitromethane 25 and CleanBrine Nitromethane 50 are used in:

 – in commercial and industrial water cooling systems

– gas and oil industry:

   – mining drilling fluids

   – packer liquids

   – secondary water for oil production

   – oilfield water systems

   – drilling fluids and recirculation

   – water systems.

CONTACTS

E-mail: info@3spolymers.ru

Web: www.3spolymers.ru

Тел: +7 495 320 28 20

+7 914 001-59-72

+7 924 545-20-00

FILL IN THE FORM